The TLM system does not have an option to select which MAC address has to be used by the license server. It uses the primary Ethernet adapter of the system for this purpose. Usually, the operating system automatically sets these priorities, at least on Windows. When using virtual machines ...
Yes, you can. For Windows To check the borrowed license details, you can use one of the following approaches: If you have installed our compiler product through an installer, follow the below steps: 1. Navigate to the \bin\ sub-directory of the product installation directory and double-cli...
Refer to the section Wait for a Free License in the TASKING License Management. See the release note of the respective TASKING product for the availability of the TSK_LICENSE_WAIT feature. For example, products that support this feature are SmartCode v10.2r1 or higher, Arm v7.0r1 or higher...
Your Node-locked client based license checkout may fail with an F104: protection err o r when the computer ID of your system does not have a constant value. The computer ID is an alphanumeric value that uniquely identifies your computer. Therefore, the computer ID must have a constant valu...
Upgrade instructions to TLM v2.1 and higher To upgrade your local license server to the latest version on Windows with minimal downtime, follow the steps below: This requires a new license key, which is required only for the license server, not for the license key entries in the licdfile.t...
License system If you want to know which licensing system is included in your product version, visit our website . Some of our older products, or older versions of current products uses the FLEXlm licensing system. Note that this article is about TLM licenses. License types For the TLM lic...
Contact our Support team to get the latest local license server software. If you had access to the Support Center (now deprecated) in the past, you can also obtain the latest software from there. The preferred way to start the local license server is to use it as a service in Linux. To do ...
Possible solution To determine if the application used is 32-bit or 64-bit, you can use one of the following approaches: Check the installation directory of the tools. When the default installation directory is used, the 32-bit versions of the tools are included in a subfolder of the C:\Pr...
Possible solution Use the latest version of licborrow and the local license server. See TLM - DOWNLOADS . Note that the 'PRODUCT' keyword, which was present in older TLM versions, is only supported for backward compatibility. Use pool names instead. For more information, see Joining or Gro...
Most likely a bulk installation was made, which means the setup.exe was not executed to install the TriCore tools but an installed version of the tools was copied to the PC. In this situation, the registry entry for our tools is missing. The graphical version of the licborrow program needs...
The maximum number of days a license can be borrowed is 128 days, where a day is literally 24 hours. So, for example, if you borrow a license for 1 day starting at 10:00, borrowing will end at 10:00 the next day. More resources TASKING License Management System - Overview TLM Documentation...
Possible causes and solutions Port already in use by another application If you use a local license server, it listens on port 9090 by default. If this port is already in use by another application, the TASKING License Service under Windows cannot start and Windows will display the followi...
You can inspect the actual status and log information of your local license server by running a browser on this server using the following address: http://localhost:9090/stats To check if the server can be reached from a client, open the below URL from the client PC: http:// lic_server_hos...
Open a Command Prompt as Administrator (right-click on the Command Prompt entry from the Windows Start Menu and select Run as administrator ) and start or stop the local license server as a service: net start "TASKING License Service" net stop "TASKING License Service" More resources TASKI...
Sometimes the connection between the client and your local license server is blocked by a firewall or anti-virus software. Possible solution Using a telnet session Note that a ping is not sufficient, since the ping protocol does not use a port number and will not make contact with your loc...
Sometimes the connection between the client and the remote license server is blocked by your firewall or anti-virus software. Possible solution To find out: 1. Download and run the getcid program . 2. Use the Test Internet Connection button to determine if the connection to the remote lice...
This article is valid when the toolset is working fine on another PC with the same installation and settings, but not on this one. The license key or file cannot be found because its location is unknown to the licensing system. Possible solution Check the environment variables of your PC b...
If a license is granted when the tool is started from one environment (for example, Eclipse) and the license is not granted if the tool is started from another environment (for example, a DOS Box, a custom Start Menu, Taskbar, or File Explorer), this may indicate that the variable settings...
This error appears when you have a node-locked license on a PC and you access our tools on that PC using remote access, such as Remote Desktop Connection. Remote desktop usage of a node-locked license is not permitted. Possible solution Terminate your Remote Desktop Connection and use our ...
Contact our Support team to get the latest license server software. If you had access to the Support Center (now deprecated) in the past, you can also obtain the latest software from there. Please visit TLM's DOWNLOAD section to download the GETCID utility and access a collection of docume...