Programming User Configuration Block (UCB)memory is essential otherwise the CPU does not have the information from which addressto boot. Refer to the Infineon documentation to determine which UCB sectors need to be programmed. The number of writes to UCB is limited. Refer to your TriCore d...
The time between CPU Run / Stop can be measured with the RH850 Time/Performance Measurement Unit (TPU) plugin. This plugin should not be used together with trace because both use the same event-triggering resource. Solution 1. Open the plugin by selecting View | [device] RH850 | Time Perfo...
RCU is a separate window of the SoC AURIX plugin which displays a list of RCU registers with according value and description. It is a user-friendly representation of the reset configuration and last reset source information. Possible solution 1. Make sure the debug session is established. ...
Possible solutions To change the option bytes you can use: RH850 Option Bytes plugin - winIDEA 9.21.94 or newer Refer to the winIDEA Help topic Option Bytes plugin . Service calls -winIDEA 9.21.8 or newer Service calls are used for FP5 communication from. Refer to winIDEA Help chapter Opti...