🎉 We're happy to announce new public releases 🎉

  • SmartCode v10.4r1 - Take advantage of all the benefits our tools have to offer and build your applications with the latest version
  • TriCore v6.3r1 Inspector v1.0r8 - Save time and detect known issues before they get into your application
Contact us to get access

car engine
Find results that contain at least one of the two words.

"car engine"
Find results that contain the exact phrase 'car engine'.

+car +engine
Find results that contain both words.

car -engine
Find results that contain the word 'car' but not 'engine'.

car*
Partial match. Find results like 'car', 'carneval', 'carousell'.

Infineon AURIX: How to enable or disable debug password protection?

04-Jun-2024

The UCB Flash must be writable to configure the debug password protection.


Using this procedure you may lock the device!


Possible solution

1. Configure winIDEA to use a password via Hardware | CPU Options | SoC.

2. Set a password.

Refer to the winIDEA Help Password protection chapter for a detailed procedure.


Explanation 

Debug Password via Hardware | CPU Options | SoC and Debug Password via UCB plugin are not exactly the same, but their values should be the same otherwise the debug connection to the target is locked. 

  • CPU options - Set the value that the debugger communicates to the device debug module when it tries to connect to it to unlock debugging
  • UCB plugin - Set the value that the debugger tries to program the device with if the debug connection is established. If it is programmed successfully then debug module is locked with this password and you have to remember and provide the same value in the CPU options to be able to unlock debug connection.

Was this answer helpful?
Same category topics
See category...
Similar topics
Load more...