Infineon TriCore TC3xx: Manual Trigger Configuration not shown
02-Jul-2024
Analyzer Manual Hardware Trigger configurations (TRD) created in winIDEA versions 9.21.134 or above may not show when transitioning to newer winIDEA versions.
Possible solution
1. Open winIDEA version 9.21.133 or below.
2. Go to File | Save as and save the TRD file.
3. Open a newer version of winIDEA.
4. Go to File | Open and select the TRD file.
More resources in winIDEA Help
Was this answer helpful?
Same category topics
- Arm Cortex-M: How to manually configure DWT Data Comparator 1?
- Arm Cortex: ITM Trace limitations via Terminal Window
- Arm Cortex: Starting trace while cores are running produces undesired trace messages
- Arm Cortex: Parallel trace doesn't work after switching applications
- NXP S32K344: Unstable or not working parallel trace
Similar topics
- Multi-core debugging issues
- Infineon TriCore: Failed to initialize debug session / DAP Initialization failed
- Infineon AURIX: Pinpoint the cause of the last MCU reset via RCU plugin
- NXP/ST Power Architecture: Trace trigger doesn't work – Analyzer remains in WAITING state
- NXP/ST Power Architecture: Trigger point (frame 0) position is not displayed