Arm Cortex Infineon XMC4xxx: Trace port settings
31-Jul-2024
Trace port settings are only applicable on devices that support parallel trace. GPIO port selection initialization is configured as script parameters. The script is included in the winIDEA SFR folder. If older workspaces are in use, ports have to be configured again.
Possible solution
1. Add the custom script XMC4xxx_TraceInit.cpp to Hardware | CPU Options | Analyzer | SoC Initialization.
2. Specify which port to use for parallel trace.
Initialization script parameters
|
Trace port |
Options |
Default setting |
| eTRACECLK |
PORT2, PORT6, PORT7 |
PORT6 |
| eTRACED0 |
PORT2, PORT3, PORT6, PORT8 |
PORT6 |
| eTRACED1 |
PORT2, PORT4, PORT6, PORT8 |
PORT6 |
| eTRACED2 |
PORT2, PORT4, PORT6, PORT8 |
PORT2 |
| eTRACED3 |
PORT1, PORT2, PORT6, PORT8 |
PORT6 |
More resources in winIDEA Help
Was this answer helpful?