🎉 We're happy to announce new public releases 🎉

  • SmartCode v10.4r1 - Take advantage of all the benefits our tools have to offer and build your applications with the latest version
  • TriCore v6.3r1 Inspector v1.0r8 - Save time and detect known issues before they get into your application
Contact us to get access

car engine
Find results that contain at least one of the two words.

"car engine"
Find results that contain the exact phrase 'car engine'.

+car +engine
Find results that contain both words.

car -engine
Find results that contain the word 'car' but not 'engine'.

car*
Partial match. Find results like 'car', 'carneval', 'carousell'.

iC3000: USB communication issues

06-Nov-2024

You are using winIDEA version 9.12.225 or older on Windows 10 and USB communication failed. 


Possible solution

1. Verify that you have firmware older than 31.5.2016. If that is the case, power off the debugger. Where to check if your firmware is up-to-date?

2. Download and open winIDEA 9.12.288. Download the legacy winIDEA build.

3. Power on the debugger. 

4. Verify that the USB communication is established.

5. Update the firmware. See step 1. 

6. Open winIDEA 9.12.225 and verify that the USB communication is working.

7. If USB communication is not working, verify if AsystUSB and winUSB drivers are both installed and defined to work with the same debugger.

8. If they are, then remove AsystUSB drivers. Refer to the topic Force USB deletion if you need help.

9. Restart the PC.

10. If it is still not working, delete both winUSB and AsystUSB drivers and clean-up the registry, restart PC and reinstall winUSB driver. Contact Technical Support to send you a link for driver installation. 

If you are using winIDEA version 9.12.191 or older, then AsystUSB driver should be used.

Was this answer helpful?
Same category topics
See category...
Similar topics
Load more...